Thursday, December 22, 2016

Tuesday, November 10, 2015

TCL SVC 200 teardown

After some discussions on Techmoan's site  I was wondering what's inside that little cam and it seems there is more to that.
Here are some pics, note you have to desolder the remote control antenna to remove the pcb board.


Below is the wire (antenna) for the remote you have to desolder.

It seems there are some tools for ambarella video processing chips here http://dc.p-mc.eu/
There is a firmware editor here http://dc.p-mc.eu/tools/a7tool   (you have to open the A5 binary and select your SVC200 firmware file.
You can extract partitions, kernel etc. 
He has also a direct usb download software which allows firmware update gia usb cable. You can get it here http://dc.p-mc.eu/tools/directusb/download

Feel free to donate to this site, he has done a great work.





Saturday, February 28, 2015

BT521 fluke battery analyzer

Here is a quick video of me trying to test batteries with one hand.
Instrument is a Fluke BT521 battery analyzer.

Sunday, July 14, 2013

Vamo simulation. Real world battery test


The guys here http://www.e-cigarette-forum.com/forum/vamo/355592-vamo-battery-thread-16.html were wondering about the performance of the VAMO e-cig with 1 28650 battery or with 2 18350 stacked.
I have some Efest batteries from the last test and awsum140 measured some current consumptions for me.
So we created a "vape" simulation with both batteries, it draws the same power that the Vamo uses during vaping for 5 seconds and rests for 25 seconds. All that to simulate the actions of the user while using it. It's like chain vaping until the battery reaches the 3.3 cut off voltage. (we didn't use the 2.750V cut off since users tend to recharge the batteries at 3.3V)

The 18650 gave us 250 puffs both times. Continuous vaping for 2 hours

The stacked 18350 gave us 477 puffs (?!?) the first time and 479 the second time. Continuous vaping for 4 hours

Seems like using two stacked batteries performs a lot better.

Get the files here:
Efest 18350 525 Vape test


Note: the stacked 18350 batteries ran cooler than the 18650 mainly because the mod draws 1.02A at 7W so there was not so much stressing.

Saturday, July 6, 2013

Led drivers, Joule thief

I made a few boards of joule thief's, they can be used to light up a white led with a 1,5V battery (or even less).
Here are a few pics.

They are pretty small and can fit inside small DIY flashlights etc.

Monday, June 24, 2013

Cytac batteries

Coming soon a test on cytac batteries and their chargers, i am waiting for their new charger.


Also a teardown of the Sanyo eneloop charger.

Friday, April 19, 2013

Sunday, April 14, 2013

Fun Project

A friend (www.moutoulos.com )sent me two pcb's and i started placing parts on them, through hole parts.
It's a RDVV PLL transmitter and a 0-30V 0-10A power supply.
You can get the pcb's yourself and assembly them, they are quite easy to build.



Friday, April 5, 2013

Fenix ARB-L2 18650 2600mAh Discharge test.

Here is an interesting battery. This is not a high drain (IMR or Li-Mn if you prefer) battery but it's protected for over currents and temperature.
The test was performed with a 1A charge current as Fenix recommends but i didn't used  the 3V cut off but the normal 2.75V.
Take a look on the temperature of this unit. On 1.92C (5A) Discharge the battery has reached 60 Celcius and the analyzer paused to let the battery cool down. The protection didn't kick in so i guess it goes further but no need to risk it.
It's a neat battery for flashlights anyway, in most cases you do not need to discharge at higher C ratings.
Here is the file Fenix ARB-L2

Wednesday, March 20, 2013

Thursday, March 14, 2013

EFEST IMR18650V2 Battery discharge test


This battery is a winner. Infact it performs almost as the 2250mAh version.
On the pdf you will find the 1C (2000mA) and 2.5C (5000mA) test
Get the file here Efest IMR18650V2 Test

Tuesday, March 12, 2013

Efest battery test coming soon.

New efest battery tests will be posted as soon as i have the results.
Batteries under test are:
e-fest 18490 1100mah 3.7V Limn battery-Nipple              
E-fest 18350 800mah 3.7V Limn battery-nipple
E-fest 18350 800mah 3.7V Limn battery-flat top
e-fest 18500 1100mah 3.7V Limn battery-Nipple
e-fest 18650 2000mah 3.7V Limn battery-flat top
e-fest 18650 2000mah 3.7V Limn battery-Nipple
e-fest 14500 700mah 3.7V Limn battery-Nipple
e-fest 16340 550mah 3.7V Limn battery-Nipple


Monday, February 25, 2013

Eneloop XX (AAA) 900mAh test

These batteries performed excellent too (99.0%). Last of the eneloops i tested.
Here is the data Eneloop XX AAA

Sanyo Eneloop (AA) 1900mAh test

Excellent batteries, performed 102.0%!!!!!
Remember anything above 80% is fine but this was amazing.

Usually the first discharge is out of the box and the batteries perform a little lower, after charging with the analyzer during the routine the battery is more refreshed and performs almost full.
Here is the data Eneloop AA

I also have to thank Ms Anita Gross from Eneloop Sales & marketing division who sent me samples of their batteries. Excellent customer service (pretty fast too) and they were happy to answer all my questions.

Sunday, February 24, 2013

Testing batteries


Sanyo Eneloop (AAA) 750mAh discharge test


Out of the box they gave me 100.5% when discharged the second time. Excellent performance.
Here is the data Eneloop AAA 750mAh

Sanyo Eneloop XX (AA) 2450mAh 1C discharge test


If not the best, probably one of the best batteries on the galaxy.
This battery straight out of the box gave me 91% and then after a charge it gave me 97.9%. I'm pretty sure if cycled one or two times more it will reach 100% or more but i am having the analyzer testing two AAA eneloops right now so i may test later.
Get the test data here Sanyo Eneloop XX (AA)

Sunday, February 17, 2013

J.W.S 26650 0.96C (5A) test

That one failed.
Fail!    Low capacity; Capacity=1,218 Ah (23,4% rated)

Summary:
1. Initial No-Load Voltage: .
2. One Hour Discharge: Fail: Low capacity; Capacity=1,245 Ah (24,0% rated).
3. 10 Minute Rest: .
4. Lithium-ion Prequalify: .
5. Lithium-ion Charge: Capacity=1,291 Ah (24,8% rated).
6. One Hour Discharge: Fail: Low capacity; Capacity=1,218 Ah (23,4% rated).
7. 10 Minute Rest: .
8. Li-ion Prequalify: .
9. Li-ion 30% Charge: User requested stop; Capacity=503,3 mAh (9,7% rated).
__________________

Initial No-Load Voltage
Duration (h:m:s): 00:02:00
Cut-off voltage: -1,000 V
Exit condition: Maximum time reached.
One Hour Discharge
Duration (h:m:s): 00:14:56
Load current: 5,003 A
Cut-off voltage: 2,750 V
Battery discharged capacity: 1,245 Ah
Exit condition: Battery cut-off voltage reached.
10 Minute Rest
Duration (h:m:s): 00:10:00
Cut-off voltage: -1,000 V
Exit condition: Maximum time reached.
Lithium-ion Prequalify
Duration (h:m:s): 00:00:03
Charge current: 530,0 mA
Exit condition: MaxV
Lithium-ion Charge
Duration (h:m:s): 01:25:15
Charge current: 3,640 A
Charge voltage: 4,200 V
Battery charged capacity: 1,291 Ah
Exit condition: Final charge current reached.
Discharge/ Charge Cycle
Branching 1st time.
One Hour Discharge
Duration (h:m:s): 00:14:36
Load current: 5,003 A
Cut-off voltage: 2,750 V
Battery discharged capacity: 1,218 Ah
Exit condition: Battery cut-off voltage reached.
10 Minute Rest
Duration (h:m:s): 00:10:01
Cut-off voltage: -1,000 V
Exit condition: Maximum time reached.
Li-ion Prequalify
Duration (h:m:s): 00:00:03
Charge current: 529,5 mA
Exit condition: MaxV
Li-ion 30% Charge
Duration (h:m:s): 00:11:39
Charge current: 3,640 A
Charge voltage: 4,200 V
Battery charged capacity: 503,3 mAh
Exit condition: User requested to stop the analysis.